FREE Standard Shipping On Orders $100 Or More! *
U.S. Motors - EB809/ASB809 C-Flange 2HP Full Rated 56J 230V Pool & Spa Pump Motor
$509.99
The U.S. Motors Emerson EB809/ASB809 C-Face 2HP Full Rated 56J 230V Single Speed Pool and Spa Pump Motor is a powerfully designed replacement motor.
More Details
Membership Available
The U.S. Motors Emerson EB809/ASB809 C-Face 2HP Full Rated 56J 230V Single Speed Pool and Spa Pump Motor is a powerfully designed replacement motor.
- Two Compartment
- 50 Degree C Ambient
- 1081 Design
- Continuous Duty
- Class B Insulated
- Open Dripproof
- Sealed Ball Bearings
- 303 Stainless Steel Shaft
- Service Factor: 1.2
- RPM: 3450
- 10.3-9.5A 208-230V
- Shaft: Threaded
- Length without Shaft: 12.02
The U.S. Motors Emerson EB809/ASB809 C-Face 2 HP Full Rated 56J 208-230V Pool and Spa Pump Motor is a powerfully designed replacement motor.
Similar to spa and pool replacement motors, the Emerson 56 C-Flange Motor is a two-compartment model with a voltage selection device, running at 2HP and 208-230V. It is Class B-insulated for efficient operation and has been designed with both sealed ballbearing sand triple bearing protection. The Emerson replacement motor has an open drip-proof design for water damage prevention and is thermally protected.
Please Note: When replacing the motor on the pump, replacing the mechanical pump seal is required to ensure proper installation. Pump seal size varies depending on the pump and not the motor.
Similar to spa and pool replacement motors, the Emerson 56 C-Flange Motor is a two-compartment model with a voltage selection device, running at 2HP and 208-230V. It is Class B-insulated for efficient operation and has been designed with both sealed ballbearing sand triple bearing protection. The Emerson replacement motor has an open drip-proof design for water damage prevention and is thermally protected.
Please Note: When replacing the motor on the pump, replacing the mechanical pump seal is required to ensure proper installation. Pump seal size varies depending on the pump and not the motor.
Featuring basic Single Phase wiring, the Emerson 56 C-Flange Motor delivers efficient operation. Little maintenance is required and the Emerson 56 C-Flange Motor is built to last
The Emerson 56 C-Flange Motor features a J-Frame that's ideal for jet pump service and is completely versatile with its threaded shaft and 56 C-Flange face
The Emerson 56 C-Flange Motor operates at a higher efficiency level than standard motors. It has longer insulation and bearing lives, with lower heat output and vibration. With aggressive performance and lower failure rates, energy expenditures are greatly diminished, saving heavily on operating costs
| Flange Type: | J Flange |
| Energy Efficiency: | High Energy Efficiency |
| Pool Type: | In Ground |
| Voltage: | 208 - 230V |
| Voltage: | 240V |
| Service Factor: | 1.00 - 1.25 |
| Speed Settings: | Single Speed |
| Horsepower: | 2 HP |
| Rating Type: | Full-Rated |
| Product Type: | Pool Motor |
| Motor Frame: | 56 Frame |
| Manufacturer: | U.S. Motors Emerson |
See Owner's Manual for details