FREE Standard Shipping On Orders $100 Or More! *
Raypak - Digital Cupro-Nickel 399,000 BTU, Natural Gas, Pool Heater for 0-2,000' Elevation - P-R406A-EN-X #50
$2,899.00
Raypak Digital Cupro-Nickel 399,000 BTU Natural Gas Pool Heater, 0-2,000' Elevation, P-R406A-EN-X #50, 010105
More Details
Membership Available
Raypak Digital Cupro-Nickel 399,000 BTU Natural Gas Pool Heater, 0-2,000' Elevation, P-R406A-EN-X #50, 010105
- LCD digital display
- 399,000 BTUs
- Automatic bypass
- Unitherm governor
- Removable burner tray
- Stainless steel burners and brass orifices
- Cupro-Nickel exchanger
- 2" CPVC connections
- 120/240V
The Raypak Digital Curpo-Nickel Natural Gas Heater is a reliable pool and spa heater, using 399,000 BTUs for operation and built with a wind resistant, powder-coat finished cabinet. It features an LCD digital display that accurately exhibits pool temperature at all times and is designed to monitor operational status while offering service diagnostics for troubleshooting. A cupro-nickel heat exchanger holds up against corrosion for reinforced durability, and it is complete with an automatic bypass and unitherm governor to prevent condensation from building up.
A removable burner tray highlights the Raypak Digital Heater's convenience. It is designed with stainless steel burners and brass orifices for increased longevity, and a stainless steel heat shield and a spark-to-pilot ignition for heat initiation. The non-combustible base means the Raypak Digital Cupro-Nickel heater can be installed on a combustible surface for flexible setup. It uses 2" CPVC connections and 120/240V for operation. Ideal for use in elevations from sea level to 2,000'.
A removable burner tray highlights the Raypak Digital Heater's convenience. It is designed with stainless steel burners and brass orifices for increased longevity, and a stainless steel heat shield and a spark-to-pilot ignition for heat initiation. The non-combustible base means the Raypak Digital Cupro-Nickel heater can be installed on a combustible surface for flexible setup. It uses 2" CPVC connections and 120/240V for operation. Ideal for use in elevations from sea level to 2,000'.
The Raypak Digital gas heater comes with a microprocessor based thermostat control. This control allows you to set your swimming pool or spa temperature precisely at your favorite setting just by pressing an up or down temperature control button. The digital display gives you a constant read out of your swimming pool water temperature.
Troubleshooting a gas heater has never been easier. The Raypak Digital has on-board diagnostic controls that let the user and the service professional know what is going on with the heater at all times. In the event that you would ever have a problem with the heater, the digital display will show where the problem is in the control circuit.
The Raypak Digital is compatible with most major swimming pool control and remote systems on the market today. Any two-wire or three-wire remote can connect to the Raypak Digital and be integrated into the pool control system of your choice.
Raypak Digital heaters can be ordered with cupro-nickel fin tube heat exchangers for added protection against aggressive water chemistry. Although rare, there are certain applications, like health club spas, where copper are just not the best choice. Cupro-nickel offers superior tolerance to bad and fluctuating water chemistry, thanks to a harder surface and thicker walled fin tube.
Installation Type: | Residential |
Emission: | Standard |
Ignition: | Electronic |
Elevation: | 0 - 2,000 ft |
Product Type: | Pool Heater |
Heat Exchanger: | Cupro-Nickel |
Pool Type: | In Ground |
Fuel Type: | Natural Gas |
Controls: | Digital |
Heat Output: | 399,000 BTU |
Manufacturer: | Raypak |
Warranty: | 1-Year |
One (1) Year Limited Warranty on Product, see Owner's Manual for a full description of warranty claims and coverage details.