FREE Standard Shipping On All Orders!*
Polaris - Polaris Quattro P40 Pressure Side Pool Cleaner
$1,149.00
Additional $150 Off with Manufacturer Mail-In Rebate through 12/31/2025.
Designed to devour debris, the Polaris Quattro P40 aggressively climbs walls and brushes the waterline. Powered by a booster pump, this pressure-side cleaner features an extra-large debris intake, dual-stage filtration canister and is ideal for all in-ground pool surfaces.
More Details
Membership Available
Frequently Bought Together
+
+
Total price: $1,583.98
Total price: $1,583.98
This item:
Polaris Quattro P40 Pressure Side Pool Cleaner
$1,149.00Quattro P40/Sport Fine Filter Canister
$54.99PB4-60 3/4 HP Booster Pump for Pressure Side Pool Cleaners, 115V/230V
$379.99$499.99
Designed to devour debris, the Polaris Quattro P40 aggressively climbs walls and brushes the waterline. Powered by a booster pump, this pressure-side cleaner features an extra-large debris intake, dual-stage filtration canister and is ideal for all in-ground pool surfaces.
- Active Brushing Attacks Fine, Stuck-On Debris
- 4WD Agility For Floors, Walls And Waterline
- Multi-Directional Navigation Delivers Quick, Efficient Coverage
- Unmatched Climbing From Floor To Wall
- Large Debris Intake With Powerful Triple-Venturi Jets
- Large Capacity, Easy-Clean Debris Canister
- Dual-Stage Filtration Collects Fine Particles And Large Debris
- Aggressive Brushing Action Up To The Waterline
- Requires Polaris Booster Pump
- Works on all in-ground pools
- Includes 31 ft of feed hose
- Additional Discount Off after Manufacturer's Rebate. Click HERE for more details!
- Requires a dedicated booster pump for operation (sold separately)
- Ensure the automatic pool cleaner is compatible with your pool equipment, pool surface and pool type
- Check existing cleaner hose size if applicable, must be soft tube feed hose with an inside diameter of 0.5 inches
- Install to dedicated pool cleaner return line
- Adjust the feed hose to fit pool length
- Assemble the pool cleaner
- Check for proper wheel RPM
- Please reference additional installation instructions in owner's manual in Guides and Documentation section below
Designed to devour debris, the Polaris Quattro P40 boasts 4WD agility to aggressively climb walls and brush the waterline. Even acorns, leaves and pebbles don't stand a chance thanks to its extra-large intake. And with dual-stage filtration, this cutting-edge pressure-side cleaner collects both fine and large debris into an easy-clean canister with a transparent window. Powered by a booster pump, the Quattro is ideal for all in-ground pool surfaces.
Additional Discount Off after Manufacturer's Rebate. Click HERE for more details!
Looking for Polaris Quattro P40 Replacement Parts?
If you need a replacement part for your Polaris Quattro P40 Pressure Side Pool Cleaner, click the following button to view the part list schematic and all available parts.
| Product Type: | Pool Cleaner |
| Pool Cleaner Type: | Pressure Cleaner |
| Manufacturer: | Polaris |
| Cord/Hose Length: | 31 ft |
| Pool Type: | In Ground |
Common Questions
The cleaner doesn't clean the entire pool or stays at one end.- Verify that the feed hose is within 6" (further or shorter) than the farthest point of the pool.
- Check the brass insert on the single side wheel. If it has come loose, replace it.
- Verify the thrust jet is in the correct position.
- Check to see if drive chain has disengaged.
- Ensure the backup valve is cycling.
- Make sure that the blue reducing disk has not been installed in the quick disconnect.
- Check that the metal pre-filter is present and not clogged.
- Make sure that the hose weight adjustment nut is screwed down correctly.
- Make sure the hoses have been cut as indicated in the instructions.
- Check that the booster pump is working normally.
- Check that the wheels are turning between 28 and 34 times per minute.
- Check that the pivoting connectors are fitted the right way round.
- Check the orientation of the rear drive jet.
- Replace standard tires with tires for tiled or glass surfaces (Ref. C-136).
- Check for air in the filter bag. (presence of air indicates a suction side air leak. It's also common for the system to purge air if solar is being used.
- Ensure the backup valve isn't running constantly.
- Ensure proper placement of the hose floats. Ensure there is no hose float between the backup valve and cleaner head.
- Check wheel RPM and pressure to verify proper flow. Check to see if drive chain has disengaged.
- Check inline filter screen for blockage.
- Check the water management system for obstructions.
- Check swivels and make sure they are spinning freely. Lay the hose out in the sun for 24 hours to eliminate any potential hose memory.