FREE Standard Shipping On Orders $100 Or More! *
In The Swim - Super Poxy Shield Epoxy Pool Paint Dark Blue, 1 gal
$146.99
$5 Off Per Gallon with Purchase of 5 Gallons - Discount Applied in Cart
In The Swim Super Poxy Shield Epoxy Pool Paint Dark Blue, 1 gal is our best one-coat epoxy pool paint providing a clean and fresh look to your swimming pool.
More Details
Membership Available
Select:
In The Swim Super Poxy Shield Epoxy Pool Paint Dark Blue, 1 gal is our best one-coat epoxy pool paint providing a clean and fresh look to your swimming pool.
- Super Poxy Shield Paint is the highest-quality pool coating available!
- 2-part catalyst system
- Only one coat needed
- Ideal for use on plaster, gunite, and fiberglass pool surfaces
- A single application lasts up to 8 years
- Delivers a stain-resistant, ceramic-like finish to all pool surfaces
- High-gloss finish for long-lasting durability
- Coverage: Approximately 125-150 sq ft per gallon
- Please Note: Epoxy Primer is required for new applications
- Use A7705 Epoxy Solvent to thin Super Poxy Shield or Poxy Shield if necessary, according to label instructions. Also used for clean-up of Super Poxy Shield and Poxy Shield.
In The Swim Super Poxy Shield pool paint is the highest-quality epoxy pool coating available. A single coat of Super Poxy Shield Paint will last up to eight years with simple routine maintenance before repainting is necessary. If you are painting a bare surface, please make sure the pool surface has been primed with epoxy primer before applying Super Poxy Shield pool paint. In The Swim Super Poxy Shield over an Epoxy Primer will deliver a stain-resistant, tile-like finish on the pool's interior surface. Due to the slick, tile-like finish of epoxy swimming pool paint, it's suggested to sprinkle sand on the pool coating before it dries for steps, shallow areas and wading pools. This will make these surfaces and areas of the pool more slip-resistant and safer for use.
When starting to paint the pool, it's best to paint the walls of the pool first and then finish painting the pool floor last. In The Swim Super Poxy Shield Pool Paint provides approximately 125 - 150 square feet average coverage per gallon. Super Poxy Shield should be applied liberally using a 1/2" nap roller cover. Pot Life: 30 minutes at 85F and above.
Common Questions:
What is the average coverage per gallon for Super Poxy Shield Epoxy Pool Paint?
In The Swim Super Poxy Shield Pool Paint provides approximately 125 - 150 square feet average coverage per gallon.
What is the curing time for In The Swim Super Poxy Shield Epoxy Pool Paint?
The curing time will vary depending on the outside ambient air temperature. If the outside ambient air temperature is 60-65F, cure time will be 6 days. For every 5F lift in outside ambient air temperature, that will cut a day off of the cure time.
What happens if it rains after painting my pool with Super Poxy Shield?
Rain or morning dew won't affect the pool's surface if it's been at least three hours after it's been painted. A milky discoloration may occur on the epoxy, not within the coating. However, that discoloration will disappear within a few weeks after filling the pool with water, leaving an immaculate coat of paint behind.
This product is not returnable after purchase. For details, please refer to our Return Policy.
| Product Type: | Pool Maintenance |
| Surface Type: | Plaster, Gunite, Concrete and Fiberglass |
| Paint Type: | Epoxy |
| Container Size: | 1 Gallon |
| Manufacturer: | In The Swim |