10% Off Sitewide Sale + Free Shipping No Minimum*
Pentair - 263064 Push-Pull Valve Kit 2" ports (7.5" Center)
$219.99
Installation Available With Our Certified Partner. After Purchase - Submit Your Request Here. Please review service restrictions before submitting service installation request.
Get An Additional 10% Off Sitewide Through 6/11. Discount Applied in Cart. Exclusions Apply*
Pentair 263064 Push-Pull Valve Kit 2" ports (7.5" Center) with two position operation.
More Details
Membership Available
Pentair 263064 Push-Pull Valve Kit 2" ports (7.5" Center) with two position operation.
- Pentair Part Number: 263064
- Catalog Part Number: 4610-1
- Ensure the slide valve is compatible with your pool filter
- Turn Off the Pump & Drain the System - Before starting, ensure the pool pump is off and drain any water from the filter system to prevent leaks.
- Remove the Old Valve - Disconnect the plumbing lines and unscrew the unions attaching the old valve to the filter.
- Install the New Valve - Secure the new valve onto the filter, reconnect the plumbing, and ensure all connections are tight.
- Test the System - Turn the pump back on, check for leaks, and ensure the valve is functioning correctly.
- Please reference additional installation instructions in the owner's manual that comes with the valve.
- Please Note: We recommend professional installation or the manufacturer warranty may be void. See Warranty section below.
-
California Residents WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Pentair 263064 Push-Pull Valve Kit 2" ports (7.5" Center) has two position operation. The 263064 down position is the filter position while the up position is backwash. While in backwash, run the system for 3 - 5 minutes or until the water being backwashed comes out clear.
California Residents WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
| Manufacturer: | Pentair |
| Installation Type: | Residential |
| Product Type: | Pool Valve |
See Owner's Manual for details