Above Ground Pools are BACK IN STOCK!
New year, new pool—get ready for next season with the ultimate backyard upgrade. Shop now!
In The Swim - Super Start-up Kit
Pool Start-Up Kit Instructions
Step 1. Begin filling the pool. Add both bottles of stain away following the directions for use on back of the bottles. This will help control minerals that are in the fill water, protecting your pool from staining and scale formation.
Step 2. As the pool is filling, add clarifier following label directions. Add the Sun Sorb into the skimmer to absorb oils for up to 30 days.
Step 3. Once the pool is full, start the filter and circulate the water, and allow the system to recirculate the water over night. This will allow complete mixing of the clarifier and stain away with the pool water.
Step 4. Once the pool has recirculated overnight, Shock treat the pool by using the pool shock. Broadcast shock directly into a concrete pool, but dilute shock in a bucket for vinyl pools. Brush any settled particles immediately.
Step 5. After 24 hours, add Algaecide according to label directions for initial treatment. Run filter nearly non-stop and clean or backwash the filter as needed. If pool is still green, re-check pH level is below 7.4, and shock the pool again.