Splash - Pool Filter Sand, #20 Grade Silica, 50 lbs.

Item No. 401219 | Manufacturer SKU: 111474
Item No. 401219 | Manufacturer SKU: 111474
Splash  Pool Filter Sand #20 Grade Silica 50 lbs.
$19.99
Splash Pool Filter Sand is easy to replace and provides a very effective way to filter out debris as small as 20-40 microns from your swimming pool water. More Details

subscription order icon Membership Available

Splash Pool Filter Sand is easy to replace and provides a very effective way to filter out debris as small as 20-40 microns from your swimming pool water.
  • Standard #20 Grade Pool Filter Sand
  • 50 lb. bag
  • Used for residential and commercial pool sand filters
  • Filters out dust, dirt, algae, hair, make-up, leaves, suntan lotion, oil and insects
  • Filters debris as small as 20-40 microns
  • 100% natural, chemical free sand
  • High purity sand for pool sand filters
  • Non-toxic, odorless, and non-staining
  • Easy to replace and maintain

Made for your pool sand filter, Splash #20 Grade Silica Filter Sand is exceptional at filtering out debris as small as 20-40 microns. It is the best choice for your pool's sand filter system. Splash Sand is rough, durable, and has a slow breakdown rate allowing you to sift out water impurities better and longer between filter changes. The #20 Silica Sand can filter out many different types of debris such as dirt, leaves, algae, and other contaminants such as suntan lotion, cosmetics, and oils.

Simple Pool Sand Filter Media Maintenance

Cleaning and backwashing a sand filter is essential to maintain optimal filtration capability for your pool. Sand filters require only basic backwashing maintenance to keep them running well, leaving you more time to sit back and enjoy your clean pool. Pool filter sand should be replaced every 5-8 years.

Pool Filter Sand That's Easy to Replace

Whether opening your pool in the spring, or doing some yearly maintenance, replacing your pool filter sand can increase the efficiency and strength of your pool sand filter system. Splash #20 Grade Sand works with Above Ground and In-Ground Sand Filters. Please Note: Follow the safety precautions and instructions on the pool sand bag label, as well as the filter owner's manual when adding and replacing sand.

Common Questions:

What is the size and grade of the Silica Sand?
  • The Splash Silica Filter Sand is standard #20 grade pool filter sand and comes in a 50 lb. bag
What type of swimming pool filter is the Splash Pool Filter Sand recommended for?
  • Splash standard grade high purity filter sand is for use with in ground and above ground pool sand filters.


WARNING: This product can expose you to crystalline silica, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Product Type: Pool Maintenance
Pool Type: Above Ground
Pool Type: In Ground
Manufacturer: Splash
Filter Type: Sand
Weight: 50 lbs
Product Dimensions: 13.1" Width x 20" Length x 4.5" Height
Product Weight: 50.75 lbs.

See Owner's Manual for details


* Freight charges may apply on oversized products. Discounts do not apply toward shipping, handling and freight fees, taxes, the purchase of select items, or previous orders. Prices are subject to change without notice.