Intex 14 inch Krystal Clear Sand Filter Pump System Is Low Cost, Easy Maintenance for Your Above Ground Pool.

Above Ground Pool Sand Filter System
6-Position Multi-Port Valve - filter, backwash, rinse, re-circulate, drain and close system
Pump Flow Rate: 2,800 GPH
Digital timer automatically turns pump on and off each day and can be set to run for up to 12
Hydro Aeration Technology is incorporated into the filter pump for improved circulation and filtration, improved water clarity and increased negative ions at the water surface
77 lb sand capacity
Includes strainer basket for pre-filtering
Includes two 1 12in connector hoses
Meets ULCSA standards
Glass media capacity (not included) 55 lb
25ft power cord with a built-in GFCI
Turnover rateSystem flow 2,150 GPH
Plunger valves and 1 12in outlet fittings not included
For above ground pools up to 17,200 gallons
System Flow Rate: 2,150 gal/hr and Pump Flow Rate: 2,800 gal/hr
Tank Size: 14 inches
Weight: 45.84 lbs

Installation Instructions:

Ensure the pool filter is compatible with your pool equipment.
Check and match the pool filter's inlet and outlet pipes of your pool system.
Place and secure the pool filter is on a level and secure foundation. (Attach to the mounting base or frame if required).
Turn on the pump to test the pool filter. Watch for leaks and make adjustments if necessary.
Please reference additional installation instructions in the owner's manual located in the Guides and Documentation section below.
Please Note: We recommend professional installation or the manufacturer warranty may be void. See Warranty section below.

Intex - 14 inch Krystal Clear Sand Filter Pump